Вот полный конфиг lighttpd
[spoilerlighttpd.conf]#######################################################################
## /etc/lighttpd/lighttpd.conf
## check /etc/lighttpd/conf.d/*.conf for the configuration of modules.
#######################################################################
#######################################################################
## Some Variable definition which will make chrooting easier.
## if you add a variable here. Add the corresponding variable in the
## chroot example aswell.
##
var.log_root = "/var/log/lighttpd"
var.server_root = "/srv/www"
var.state_dir = "/var/run"
var.home_dir = "/var/lib/lighttpd"
var.conf_dir = "/etc/lighttpd"
## run the server chrooted.
## This requires root permissions during startup.
## If you run Chrooted set the the variables to directories relative to
## the chroot dir.
## example chroot configuration:
#var.log_root = "/logs"
#var.server_root = "/"
#var.state_dir = "/run"
#var.home_dir = "/lib/lighttpd"
#var.vhosts_dir = "/vhosts"
#var.conf_dir = "/etc"
#server.chroot = "/srv/www"
## Some additional variables to make the configuration easier
## Base directory for all virtual hosts
## used in:
## conf.d/evhost.conf
## conf.d/simple_vhost.conf
## vhosts.d/vhosts.template
var.vhosts_dir = server_root + "/vhosts"
## Cache for mod_compress
## used in:
## conf.d/compress.conf
var.cache_dir = "/var/cache/lighttpd"
## Base directory for sockets.
## used in:
## conf.d/fastcgi.conf
## conf.d/scgi.conf
var.socket_dir = home_dir + "/sockets"
#######################################################################
#######################################################################
## Load the modules.
include "modules.conf"
#######################################################################
#######################################################################
## Basic Configuration
## ---------------------
server.port = 80
## Use IPv6?
server.use-ipv6 = "disable"
## bind to a specific IP
#server.bind = "localhost
## Run as a different username/groupname.
## This requires root permissions during startup.
server.username = "lighttpd"
server.groupname = "lighttpd"
## enable core files.
#server.core-files = "disable"
## Document root
server.document-root = server_root + "/lighttpd"
## The value for the "Server:" response field.
## It would be nice to keep it at "lighttpd".
#server.tag = "lighttpd"
## store a pid file
server.pid-file = state_dir + "/lighttpd.pid"
#######################################################################
#######################################################################
## Logging Options
## ------------------
## all logging options can be overwritten per vhost.
## Path to the error log file
server.errorlog = log_root + "/error.log"
## If you want to log to syslog you have to unset the
## server.errorlog setting and uncomment the next line.
#server.errorlog-use-syslog = "enable"
## Access log config
include "conf.d/access_log.conf"
## The debug options are moved into their own file.
## see conf.d/debug.conf for various options for request debugging.
##
include "conf.d/debug.conf"
#######################################################################
#######################################################################
##
## Tuning/Performance
## --------------------
##
## corresponding documentation:
##
http://www.lighttpd.net/documentation/performance.html
##
## set the event-handler (read the performance section in the manual)
##
## possible options on linux are:
##
## select
## poll
## linux-sysepoll
##
## linux-sysepoll is recommended on kernel 2.6.
##
server.event-handler = "linux-sysepoll"
##
## The basic network interface for all platforms at the syscalls read()
## and write(). Every modern OS provides its own syscall to help network
## servers transfer files as fast as possible
##
## linux-sendfile - is recommended for small files.
## writev - is recommended for sending many large files
##
server.network-backend = "linux-sendfile"
##
## As lighttpd is a single-threaded server, its main resource limit is
## the number of file descriptors, which is set to 1024 by default (on
## most systems).
##
## If you are running a high-traffic site you might want to increase this
## limit by setting server.max-fds.
##
## Changing this setting requires root permissions on startup. see
## server.username/server.groupname.
##
## By default lighttpd would not change the operation system default.
## But setting it to 2048 is a better default for busy servers.
##
server.max-fds = 2048
##
## Stat() call caching.
##
## lighttpd can utilize FAM/Gamin to cache stat call.
##
## possible values are:
## disable, simple or fam.
##
server.stat-cache-engine = "simple"
##
## Fine tuning for the request handling
##
## max-connections == max-fds/2 (maybe /3)
## means the other file handles are used for fastcgi/files
##
server.max-connections = 1024
##
## How many seconds to keep a keep-alive connection open,
## until we consider it idle.
##
## Default: 5
##
#server.max-keep-alive-idle = 5
##
## How many keep-alive requests until closing the connection.
##
## Default: 16
##
#server.max-keep-alive-requests = 16
##
## Maximum size of a request in kilobytes.
## By default it is unlimited (0).
##
## Uploads to your server cant be larger than this value.
##
#server.max-request-size = 0
##
## Time to read from a socket before we consider it idle.
##
## Default: 60
##
#server.max-read-idle = 60
##
## Time to write to a socket before we consider it idle.
##
## Default: 360
##
#server.max-write-idle = 360
##
## Traffic Shaping
## -----------------
##
## see /usr/share/doc/lighttpd/traffic-shaping.txt
##
## Values are in kilobyte per second.
##
## Keep in mind that a limit below 32kB/s might actually limit the
## traffic to 32kB/s. This is caused by the size of the TCP send
## buffer.
##
## per server:
##
#server.kbytes-per-second = 128
##
## per connection:
##
#connection.kbytes-per-second = 32
##
#######################################################################
#######################################################################
##
## Filename/File handling
## ------------------------
##
## files to check for if .../ is requested
## index-file.names = ( "index.php", "index.rb", "index.html",
## "index.htm", "default.htm" )
##
index-file.names += (
"index.xhtml", "index.html", "index.htm", "default.htm", "index.php"
)
##
## deny access the file-extensions
##
## ~ is for backupfiles from vi, emacs, joe, ...
## .inc is often used for code includes which should in general not be part
## of the document-root
url.access-deny = ( "~", ".inc" )
##
## disable range requests for pdf files
## workaround for a bug in the Acrobat Reader plugin.
##
$HTTP["url"] =~ "\.pdf$" {
server.range-requests = "disable"
}
##
## url handling modules (rewrite, redirect)
##
#url.rewrite = ( "^/$" => "/server-status" )
#url.redirect = ( "^/wishlist/(.+)" => "
http://www.example.com/$1" )
##
## both rewrite/redirect support back reference to regex conditional using %n
##
#$HTTP["host"] =~ "^www\.(.*)" {
# url.redirect = ( "^/(.*)" => "http://%1/$1" )
#}
##
## which extensions should not be handle via static-file transfer
##
## .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi
##
static-file.exclude-extensions = ( ".php", ".pl", ".fcgi", ".scgi" )
##
## error-handler for status 404
##
#server.error-handler-404 = "/error-handler.html"
#server.error-handler-404 = "/error-handler.php"
##
## Format: <errorfile-prefix><status-code>.html
## -> ..../status-404.html for 'File not found'
##
#server.errorfile-prefix = "/srv/www/htdocs/errors/status-"
##
## mimetype mapping
##
include "conf.d/mime.conf"
##
## directory listing configuration
##
include "conf.d/dirlisting.conf"
##
## Should lighttpd follow symlinks?
##
server.follow-symlink = "enable"
##
## force all filenames to be lowercase?
##
#server.force-lowercase-filenames = "disable"
##
## defaults to /var/tmp as we assume it is a local harddisk
##
server.upload-dirs = ( "/var/tmp" )
##
#######################################################################
#######################################################################
##
## SSL Support
## -------------
##
## To enable SSL for the whole server you have to provide a valid
## certificate and have to enable the SSL engine.::
##
## ssl.engine = "enable"
## ssl.pemfile = "/path/to/server.pem"
##
## The HTTPS protocol does not allow you to use name-based virtual
## hosting with SSL. If you want to run multiple SSL servers with
## one lighttpd instance you must use IP-based virtual hosting: ::
##
## $SERVER["socket"] == "10.0.0.1:443" {
## ssl.engine = "enable"
## ssl.pemfile = "/etc/ssl/private/
www.example.com.pem"
## server.name = "
www.example.com"
##
## server.document-root = "/srv/www/vhosts/example.com/www/"
## }
##
## If you have a .crt and a .key file, cat them together into a
## single PEM file:
## $ cat /etc/ssl/private/lighttpd.key /etc/ssl/certs/lighttpd.crt \
## > /etc/ssl/private/lighttpd.pem
##
#ssl.pemfile = "/etc/ssl/private/lighttpd.pem"
##
## optionally pass the CA certificate here.
##
##
#ssl.ca-file = ""
##
#######################################################################
#######################################################################
##
## custom includes like vhosts.
##
#include "conf.d/config.conf"
include_shell "cat /etc/lighttpd/vhosts.d/*.conf"
##
#######################################################################[/spoiler]
[spoilermodules.conf]#######################################################################
##
## Modules to load
## -----------------
##
## at least mod_access and mod_accesslog should be loaded
## all other module should only be loaded if really neccesary
##
## - saves some time
## - saves memory
##
## the default module set contains:
##
## "mod_indexfile", "mod_dirlisting", "mod_staticfile"
##
## you dont have to include those modules in your list
##
## Modules, which are pulled in via conf.d/*.conf
##
## NOTE: the order of modules is important.
##
## - mod_accesslog -> conf.d/access_log.conf
## - mod_compress -> conf.d/compress.conf
## - mod_status -> conf.d/status.conf
## - mod_webdav -> conf.d/webdav.conf
## - mod_cml -> conf.d/cml.conf
## - mod_evhost -> conf.d/evhost.conf
## - mod_simple_vhost -> conf.d/simple_vhost.conf
## - mod_mysql_vhost -> conf.d/mysql_vhost.conf
## - mod_trigger_b4_dl -> conf.d/trigger_b4_dl.conf
## - mod_userdir -> conf.d/userdir.conf
## - mod_rrdtool -> conf.d/rrdtool.conf
## - mod_ssi -> conf.d/ssi.conf
## - mod_cgi -> conf.d/cgi.conf
## - mod_scgi -> conf.d/scgi.conf
## - mod_fastcgi -> conf.d/fastcgi.conf
## - mod_proxy -> conf.d/proxy.conf
## - mod_secdownload -> conf.d/secdownload.conf
## - mod_expire -> conf.d/expire.conf
##
server.modules = (
"mod_access",
"mod_alias",
# "mod_auth",
# "mod_evasive",
# "mod_redirect",
# "mod_rewrite",
# "mod_setenv",
# "mod_usertrack",
)
##
#######################################################################
#######################################################################
##
## Config for various Modules
##
##
## mod_ssi
##
#include "conf.d/ssi.conf"
##
## mod_status
##
#include "conf.d/status.conf"
##
## mod_webdav
##
#include "conf.d/webdav.conf"
##
## mod_compress
##
#include "conf.d/compress.conf"
##
## mod_userdir
##
#include "conf.d/userdir.conf"
##
## mod_magnet
##
#include "conf.d/magnet.conf"
##
## mod_cml
##
#include "conf.d/cml.conf"
##
## mod_rrdtool
##
#include "conf.d/rrdtool.conf"
##
## mod_proxy
##
#include "conf.d/proxy.conf"
##
## mod_expire
##
#include "conf.d/expire.conf"
##
## mod_secdownload
##
#include "conf.d/secdownload.conf"
##
#######################################################################
#######################################################################
##
## CGI modules
##
##
## SCGI (mod_scgi)
##
#include "conf.d/scgi.conf"
##
## FastCGI (mod_fastcgi)
##
include "conf.d/fastcgi.conf"
##
## plain old CGI (mod_cgi)
##
include "conf.d/cgi.conf"
##
#######################################################################
#######################################################################
##
## VHost Modules
##
## Only load ONE of them!
## ========================
##
##
## You can use conditionals for vhosts aswell.
##
## see
http://www.lighttpd.net/documentation/c ... ation.html
##
##
## mod_evhost
##
#include "conf.d/evhost.conf"
##
## mod_simple_vhost
##
#include "conf.d/simple_vhost.conf"
##
## mod_mysql_vhost
##
#include "conf.d/mysql_vhost.conf"
##
#######################################################################[/spoiler]
[spoilercgi.conf]#######################################################################
##
## CGI modules
## ---------------
##
##
http://www.lighttpd.net/documentation/cgi.html
##
server.modules += ( "mod_cgi" )
##
## Plain old CGI handling
##
## For PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini.
##
cgi.assign = ( ".pl" => "/usr/bin/perl",
".cgi" => "/usr/bin/perl",
".rb" => "/usr/bin/ruby",
".erb" => "/usr/bin/eruby",
".py" => "/usr/bin/python" )
##
## to get the old cgi-bin behavior of apache
##
## Note: make sure that mod_alias is loaded if you uncomment the
## next line. (see modules.conf)
##
#alias.url += ( "/cgi-bin" => server_root + "/cgi-bin" )
#$HTTP["url"] =~ "^/cgi-bin" {
# cgi.assign = ( "" => "" )
#}
##
#######################################################################[/spoiler]
[/spoiler]